Menu
Back
  1. Products
  2. Power connectors
  3. M25 Power
  4. M25 Male cable connector, Contacts: 12, 5.0-8.0 mm, shieldable, solder, IP40
Part no.: 09 0445 00 12

M25 Male cable connector, Contacts: 12, 5.0-8.0 mm, shieldable, solder, IP40

M25, series 691, Power Connectors
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 09 0445 00 12
Connector design Male cable connector
Version Connector pin straight
Connector locking system screw
Termination solder
Degree of protection IP40
Cross-sectional area 0.75 mm² / AWG 18
Cable outlet 5.0-8.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 500 Mating cycles
Weight (g) 41.65
Customs tariff number 85369010
Country of Origin DE
Rated voltage 125 V
Rated impulse voltage 1500 V
Rated current 5.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection Cable clamp and soldering lug
Housing material GD-AL eloxiert
Contact body material PET (UL94 V-0)
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number a6248ff3-5c9d-487d-8dba-8c3b383e719e
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.25 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Downloads
Data sheet
Data sheet 09 0445 00 12
PDF
REACH
09 0445 00 12
PDF
RoHS
09 0445 00 12
PDF
China RoHS
09 0445 00 12
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
M25 Power
09 0445 00 12