Part no.: 09 4832 00 08
Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67
Push-Pull, series 440, Miniature Connectors
General features
MorelessPart no. | 09 4832 00 08 |
Connector design | Female panel mount connector |
Version | Connector socket straight |
Connector locking system | Push-Pull |
Termination | solder |
Degree of protection | IP67 |
Cross-sectional area | 0.75 mm² / AWG 18 |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 1000 Mating cycles |
Weight (g) | 22.00 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 60 V |
Rated impulse voltage | 500 V |
Rated current | 5.0 A |
Insulation resistance | ≥ 1010 Ω |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
EMC compliance | shieldable |
Shield connection | Shield on the housing |
Material
MorelessContact body material | PBT (UL94 V-0) |
Contact material | CuSn (bronze) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 08ab1715-8fc6-489b-ab32-f71d86bb9a43 |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-09 |
ETIM 9.0 | EC003569 |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector to the device connector, we recommend tightening the threaded ring to 2 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Downloads
Data sheet
Data sheet 09 4832 00 08
download
REACH
09 4832 00 08
download
RoHS
09 4832 00 08
download
China RoHS
09 4832 00 08
download
CAD files
Select required format