09 0433 216 05 | binder M12 Male receptacle, Contacts: 5, unshielded, THT, IP67

Menu

Menu

Products
Automation technology - Sensors and actuators
M12-A
M12 Male receptacle, Contacts: 5, unshielded, THT, IP67

Illustration 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — Illustration

3D View 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — 3D View

Conductor layout 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — Conductor layout

Scale drawing 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — Scale drawing

Assembly instructions / Panel cut-out 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 0433 216 05 - M12 Male receptacle, Contacts: 5, unshielded, THT, IP67 — Contact arrangement (Plug-in side)

Part no.	09 0433 216 05
Connector design	Male receptacle
Type standard	DIN EN 61076-2-101
Version	Connector pin straight
Connector locking system	screw
Termination	THT
Degree of protection	IP67
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	0.98
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	60 V
Rated impulse voltage	1500 V
Rated current	4.0 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	III
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	40cf7959-3074-4393-a2c3-bdef2bbdc64c

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

Data sheet 09 0433 216 05

CAD files

Select required format