79 5255 190 05 | binder M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL

Menu

Menu

Products
Automation technology - Sensors and actuators
Connecting cords
M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL

Illustration 79 5255 190 05 - M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL — Illustration

3D View 79 5255 190 05 - M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL — 3D View

Pin assignment plans 79 5255 190 05 - M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL — Pin assignment plans

Scale drawing 79 5255 190 05 - M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL — Scale drawing

Contact arrangement (Plug-in side) 79 5255 190 05 - M12/M12,M12 Twin distributor, T-distributor, male connector - 2 female connector, Contacts: 5, unshielded, pluggable, IP68, UL — Contact arrangement (Plug-in side)

Part no.	79 5255 190 05
Connector design	Twin distributor, T-distributor, male connector - 2 female connector
Type standard	DIN EN 61076-2-101
Version	Twin distributors
Connector locking system	screw
Termination	pluggable
Degree of protection	IP68
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	28.00
Customs tariff number	85444290
Country of Origin	DE

Rated voltage	60 V
Rated impulse voltage	1500 V
Rated current	4.0 A
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	PUR
Contact body material	PUR
Contact material	CuZn (brass) / CuSn (bronze)
Contact plating	Au (gold)
Locking material	Zinc die-cast nickel-plated
REACH SVHC	None (No pollutants)
SCIP number	SCIP-number not available

Approvals	UL

eCl@ss 11.1	27-06-03-11
ETIM 9.0	EC002638

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive	2011/65/EU (EN 50581:2012)

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

Data sheet 79 5255 190 05

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

Declaration of conformity

UKCA declaration of conformity

CAD files

Select required format