99 9134 00 12 | binder Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE

Menu

Menu

Products
Miniature connectors
Snap-in IP67
Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE

Illustration 99 9134 00 12 - Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE — Illustration

3D View 99 9134 00 12 - Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE — 3D View

Scale drawing 99 9134 00 12 - Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE — Scale drawing

Assembly instructions 99 9134 00 12 - Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE — Assembly instructions

Contact arrangement (Plug-in side) 99 9134 00 12 - Snap-In Female cable connector, Contacts: 12, 4.0-6.0 mm, unshielded, solder, IP67, UL, VDE — Contact arrangement (Plug-in side)

Part no.	99 9134 00 12
Connector design	Female cable connector
Version	Connector socket straight
Connector locking system	snap-in
Termination	solder
Degree of protection	IP67
Cross-sectional area	max. 0.25 mm² / AWG 24
Cable outlet	4.0-6.0 mm
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 500 Mating cycles
Weight (g)	10.40
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	60 V
Rated impulse voltage	800 V
Rated current	2.0 A
Insulation resistance	≥ 10¹⁰ Ω
Pollution degree	2
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	PA
Contact body material	PA (UL94 V-0) black
Contact material	CuSn (bronze)
Contact plating	Au (gold)
REACH SVHC	CAS 96-45-7 (Imidazolidine-2-thione) CAS 7439-92-1 (Lead)
SCIP number	4d67d894-2185-4978-ba9a-d952801142b7

Approvals	UL, VDE

eCl@ss 11.1	27-44-01-02
ETIM 9.0	EC002635

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".

Downloads

Data sheet 99 9134 00 12

VDE certificate

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

CAD files

Select required format