09 3390 186 04 | binder M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened

Menu

Menu

Products
Automation technology - Sensors and actuators
M8
M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened

Illustration 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — Illustration

3D View 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — 3D View

Conductor layout 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — Conductor layout

Scale drawing 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — Scale drawing

Assembly instructions / Panel cut-out 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 3390 186 04 - M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, M12x1.0, front fastened — Contact arrangement (Plug-in side)

There is a newer version of this article

Direct comparison old/new version

Automation Technology - Sensors and Actuators--Female panel mount connector_718_4_FF

86 6518 1100 00004

M8 Female panel mount connector, Contacts: 4, unshielded, THT, IP67, UL, M12x1.0, front fastened

M8, series 718, Automation Technology - Sensors and Actuators

Part no.	09 3390 186 04
Connector design	Female panel mount connector
Type standard	DIN EN 61076-2-104
Version	Connector socket straight
Connector locking system	screw
Termination	THT
Degree of protection	IP67
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	12.23
Customs tariff number	85369010

Rated voltage	50 V (AC) / 60 V (DC)
Rated impulse voltage	1500 V
Rated current	4.0 A
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	CuZn (Brass nickel plated)
Contact body material	PA black
Contact material	CuSn (bronze)
Contact plating	Au (gold)
Contact length	0.5 mm
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	8a2ca6a0-0c4e-44cc-bf09-35529b9d1eb7

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).

Downloads

Data sheet 09 3390 186 04

CAD files

Select required format