Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. M12-L
  4. M12 Male receptacle, Contacts: 4+FE, unshielded, THR, IP68
Part no.: 86 5443 0000 00845

M12 Male receptacle, Contacts: 4+FE, unshielded, THR, IP68

M12-L, series 823, Automation Technology - Voltage and Power Supply
Compare product
Downloads
General features
Moreless
Part no. 86 5443 0000 00845
Alternative part no.: 09 0641 100 05
Connector design Male receptacle
Type standard DIN EN IEC 61076-2-111:2018-10;VDE 0687-76-2-111:2018-10
Version Connector pin straight
Connector locking system screw
Termination THR
Degree of protection IP68
Temperature range from/to -40 °C / 105 °C
Mechanical operation > 100 Mating cycles
Weight (g) 0.00
Customs tariff number 85369010
Country of Origin DE
Rated voltage 63 V
Rated impulse voltage 1500 V
Rated current 16 A (14 A UL)
Insulation resistance > 1010 Ω
Pollution degree 3
Overvoltage category III
Insulating material group I
EMC compliance unshielded
Contact body material PA (UL94 V-0)
Contact material CuSn (bronze) / CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 7cd66267-5842-49bc-9592-752d8b76c3fc
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
M12-L
86 5443 0000 00845