09 0431 90 04 | binder M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5

Menu

Menu

Products
Automation technology - Data transmission
M12-B
M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5

Illustration 09 0431 90 04 - M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5 — Illustration

3D View 09 0431 90 04 - M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5 — 3D View

Scale drawing 09 0431 90 04 - M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5 — Scale drawing

Assembly instructions / Panel cut-out 09 0431 90 04 - M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 0431 90 04 - M12 Male panel mount connector, Contacts: 4, unshielded, solder, IP67, M12x0.5 — Contact arrangement (Plug-in side)

Part no.	09 0431 90 04
Connector design	Male panel mount connector
Type standard	DIN EN 61076-2-101
Version	Connector pin straight
Connector locking system	screw
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	3.63
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	250 V
Rated impulse voltage	2500 V
Rated current	4.0 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	PA
Contact body material	PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	a0ee28f1-deec-447f-94e8-b5fbb693e0f3

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

Data sheet 09 0431 90 04

CAD files

Select required format