Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M8-D
  4. M8 Male cable connector, Contacts: 4, 5.0-8.0 mm, shieldable, screw clamp, IP67
Part no.: 99 3369 600 04

M8 Male cable connector, Contacts: 4, 5.0-8.0 mm, shieldable, screw clamp, IP67

M8-D, series 818, Automation Technology - Sensors and Actuators
Compare product
Downloads
General features
Moreless
Part no. 99 3369 600 04
Connector design Male cable connector
Type standard DIN EN 61076-2-114
Version Connector pin straight
Connector locking system M8x1
Termination screw clamp
Degree of protection IP67
Cross-sectional area 0.14-0.50 mm²
Cable outlet 5.0-8.0 mm
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 34.45
Customs tariff number 85444290
Country of Origin DE
Rated voltage 63 V DC
Rated impulse voltage 1500 V
Rated current 4.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance shieldable
Shield connection Iris type spring
Housing material CuZn (Brass nickel plated)
Contact body material PA black
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number d39684a9-073d-4e37-9636-4f895e983dac
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  8. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).
Downloads
Data sheet
Data sheet 99 3369 600 04
PDF
REACH
99 3369 600 04
PDF
RoHS
99 3369 600 04
PDF
China RoHS
99 3369 600 04
PDF
CAD files
Select required format
M8-D
99 3369 600 04