Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. M12-B
  4. M12 Female panel mount connector, Contacts: 4, unshielded, single wires, IP68, UL, PG 9, stainless steel
Part no.: 76 2134 0111 00104-0200

M12 Female panel mount connector, Contacts: 4, unshielded, single wires, IP68, UL, PG 9, stainless steel

M12-B, series 766, Automation Technology - Data Transmission
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 76 2134 0111 00104-0200
Alternative part no.: 09 4432 282 04
Notice
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
Connector design Female panel mount connector
Type standard DIN EN 61076-2-101
Wire length 0.2 m (Standard 0.2 m. Other lengths are available on request).
Version Connector socket straight
Connector locking system screw
Termination single wires
Degree of protection IP68
Cross-sectional area 0.25 mm² / AWG 24
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Additional information stainless steel
Weight (g) 19.40
Customs tariff number 85444290
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current 4.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material Stainless steel
Contact body material PA
Contact material CuSn (bronze)
Contact plating Au (gold)
Locking material Stainless steel
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 6cde7dbe-9fb0-4dc4-9694-5612a682ed10
eCl@ss 11.1 27-44-01-03
ETIM 9.0 EC003570
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 76 2134 0111 00104-0200
PDF
Data sheet, Data sheet 76 2134 0111 00104-0200
Certificates
UL certificate
PDF, 955.92 KB
REACH
76 2134 0111 00104-0200
PDF
RoHS
76 2134 0111 00104-0200
PDF
China RoHS
76 2134 0111 00104-0200
PDF
CAD files
Select required format
M12-B
76 2134 0111 00104-0200