Menu
Back
  1. Products
  2. Power connectors
  3. Bayonet IP40 Power
  4. Bayonet Female cable connector, Contacts: 3, 5.0-8.0 mm, shieldable, solder, IP40
Part no.: 09 0056 00 03

Bayonet Female cable connector, Contacts: 3, 5.0-8.0 mm, shieldable, solder, IP40

Bayonet, series 690, Power Connectors
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 09 0056 00 03
Connector design Female cable connector
Version Connector socket straight
Connector locking system Bayonet
Termination solder
Degree of protection IP40
Cross-sectional area 2.50 mm² / AWG 14
Cable outlet 5.0-8.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 50 Mating cycles
Weight (g) 28.96
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current 10.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance shieldable
Shield connection Cable clamp and soldering lug
Housing material GD-AL eloxiert
Contact body material PET (UL94 V-0)
Contact material CuSn (bronze)
Contact plating Ag (silver)
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.25 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Downloads
Data sheet
Data sheet 09 0056 00 03
PDF
REACH
09 0056 00 03
PDF
RoHS
09 0056 00 03
PDF
China RoHS
09 0056 00 03
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Bayonet IP40 Power
09 0056 00 03