Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M5
  4. M5 Female angled panel mount connector, Contacts: 4, shieldable, solder, IP68
Part no.: 86 8005 1101 00004

M5 Female angled panel mount connector, Contacts: 4, shieldable, solder, IP68

M5, series 707, Automation Technology - Sensors and Actuators
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 86 8005 1101 00004
Connector design Female angled panel mount connector
Version Connector pin angled
Connector locking system screw
Termination solder
Degree of protection IP68
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 0.00
Customs tariff number 85369010
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 1500 V
Rated current 1.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance shieldable
Housing material CuZn (brass)
Contact body material LCP
Contact material CuZn (brass) / CuSn (bronze)
Contact plating Au (gold)
Locking material CuZn (brass)
REACH SVHC None (No pollutants)
SCIP number SCIP-number not available
RoHS Directive 2011/65/EU (EN 50581:2012)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
M5
86 8005 1101 00004