Part no.: 09 3487 86 08
M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, PUR, black, front fastened
M8, series 718, Automation Technology - Sensors and Actuators
There is a newer version of this article
Direct comparison old/new version
76 6119 1111 00008-0200
M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, UL, front fastened
M8, series 718, Automation Technology - Sensors and Actuators
General features
MorelessPart no. | 09 3487 86 08 |
Connector design | Male panel mount connector |
Type standard | DIN EN 61076-2-104 |
Wire length | 0.2 m (Standard 0.2 m. Other lengths are available on request). |
Version | Connector pin straight |
Connector locking system | screw |
Termination | single wires |
Degree of protection | IP67 |
Cross-sectional area | 0.14 mm² / AWG 26 |
Temperature range from/to | -25 °C / 85 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 7.00 |
Customs tariff number | 85369010 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 30 V |
Rated impulse voltage | 800 V |
Rated current | 1.5 A |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
EMC compliance | unshielded |
Material
MorelessHousing material | CuZn (Brass nickel plated) |
Contact body material | PUR black |
Contact material | CuZn (brass) / CuSn (bronze) |
Contact plating | Au (gold) |
Locking material | Zinc die-cast nickel-plated |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 60675e9a-b5c8-46b2-9804-8dd10d83f2d9 |
Classifications
MorelesseCl@ss 11.1 | 27-44-01-03 |
ETIM 9.0 | EC003569 |
Cable data
MorelessStructure of the cable | |
Cable diameter | 4.7 mm |
Sheath material | PUR |
Single-lead insulation | PP9Y halogen-free |
Single-lead structure | 43 x 0.10 mm |
Cable color | black |
Mechanical properties | |
Bending radius, fixed cable | ≥ 5 x Ø |
Bending radius, moving cable | ≥ 10 x Ø |
Bending cycles | > 5 million |
Permitted acceleration | ≥ 5 m/s² |
Travel speed | ≤ 200 m/min |
Thermal properties | |
Temperature range cable in move from/to | -25 °C / 80 °C |
Temperature range cable fixed from/to | -50 °C / 80 °C |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
Downloads
Data sheet
Data sheet 09 3487 86 08
download
REACH
09 3487 86 08
download
RoHS
09 3487 86 08
download
China RoHS
09 3487 86 08
download
CAD files
Select required format